PlantAISim

Deaerator / Storage

Deaerator Storage Tank Sizing

Reference-based what this means

Enough deaerated water in reserve to feed the boiler through an orderly shutdown if the deaerator's own supply is suddenly interrupted — sized from the standard retention-time guideline, not a fixed number.

? New here? How to use this calculator

What this answers: if the deaerator's steam or water supply trips, how long can the boiler keep running on just the water already sitting in the storage section before it runs dry? Sized the other way around: pick the retention time you want, get the tank volume.

Feed this module the total feedwater flow from Thermal & Mass Balance and the water density follows from that module's operating temperature.

The numbers already in the fields are a plausible example, not a template you must match. Overwrite them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Flow & Temperature
kg/s
°C — from Thermal & Mass Balance
Retention Time?
minutes, at the flow above
Vessel Proportions
typical horizontal storage vessel, 3–4
% of vessel volume — leaves freeboard for surge/vent

Required Storage Volume

Approximate Vessel Size

A rough horizontal-cylinder estimate from L/D and fill level — the final shape is a mechanical/layout decision, not purely a sizing calculation.

Reference-based. 10 minutes of storage at design flow is the retention-time guideline most commonly cited for deaerator feedwater storage sections (American Boiler Manufacturers Association technical guidance), with a stated practical range of roughly 5–30 minutes depending on plant design and operating mode. See Validation & Limitations.

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback