PlantAISim

Steam Turbine / Off-Design

Turbine Off-Design / Part-Load

Reference-based what this means

A turbine stage group's inlet, exit and flow don't move independently — fix any two and Stodola's Ellipse (Cone) Law gives the third. Run one group at a time; apply it again, group by group, to chain a full Steam Turbine Expansion case to a new load.

? New here? How to use this calculator

What this answers: you know how one stage group of a turbine behaves at its design point (inlet pressure, exit pressure, flow). At a different load, one of those three changes and you need to know what happens to the other two. Stodola's Law gives a fixed relationship between them for that group's geometry, with no need to know the actual blade dimensions.

Pick what's fixed and what you're solving for with the mode buttons below — which one applies depends on your situation. A governing (first) stage usually has its exit pressure set by everything downstream, so you'd fix exit pressure and solve for inlet. A group feeding a fixed extraction load might have inlet fixed by an upstream group instead.

The numbers already in the fields are a plausible example — not a template you must match. Overwrite them with your own design point; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Design Point (this stage group)
bar(a)
°C
bar(a)
kg/s
Off-Design Case — Solve For?
kg/s
bar(a)
bar(a)
°C — often similar to design if boiler/governor-controlled

Design-Point Check

Off-Design Result

Consistency Self-Check

Reference-based. Stodola's Ellipse (Cone) Law is long-established, published turbine off-design theory (A. Stodola, Steam and Gas Turbines, 1927; see also D.H. Cooke, "On Prediction of Off-Design Multistage Turbine Pressures by Stodola's Ellipse," ASME 1984) and is the method commercial plant-simulation software (e.g. EBSILON Professional) uses for exactly this calculation. This module hasn't yet been checked against a published numeric worked example — the Consistency Self-Check above instead verifies the implementation is internally correct (feeding the design point back in reproduces it exactly). It assumes an infinite-stage, unchoked group; real groups with very few stages, or operating near choked flow, deviate from the ideal ellipse — see Validation & Limitations.

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback