PlantAISim

ESP Design / Fly Ash Electrical Properties

Fly Ash Particle Density and Electrical Properties — Coal

Validated what this means

Particle density, dielectric constant, dipole factor and resistivity from ash oxide composition — using the verified Bickelhaupt (EPRI CS-4145) correlation. For biomass or biomass-dominant blends, see the Biomass version instead — Bickelhaupt significantly overestimates resistivity for high-potassium, low-sodium biomass ash.

Bickelhaupt is verified against a published worked example (US Patent 7078235 / EPRI CS-4145) and is well-established for coal fly ash across a wide alkali range.

? New here? How to use this calculator

What this answers: Same as the biomass version, using a correlation built specifically for coal ash instead.

The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Fuel Source

No coal fuel database yet — enter ash composition manually below. Defaults shown are typical bituminous coal ash.

Ash Oxide Composition (wt%)

Operating Conditions

°C
kV/cm (from ESP field module — enter manually for now)
vol%
ppm, dry
mass %
% — voids within each ash particle, not gaps between particles
kg/m³ — enter directly for now; will link to the future Basic Combustion module

Dielectric Properties

Per-oxide dielectric constants: high confidence for MgO (9.65, well-established) and TiO2 (86/170, rutile tensor, matches literature closely). Lower confidence for Na2O/K2O/SO3/P2O5 (pure-compound values are not well tabulated in standard references — treat as engineering estimates).

Resistivity — Method Comparison

Value

Bickelhaupt equations from EPRI CS-4145 (Bickelhaupt, published via US Patent 7078235), cross-checked against the patent's own worked example (Table 19) before use here.

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback