ESP Design / Fly Ash Electrical Properties
Particle density, dielectric constant, dipole factor and resistivity from ash oxide composition — using the verified Bickelhaupt (EPRI CS-4145) correlation. For biomass or biomass-dominant blends, see the Biomass version instead — Bickelhaupt significantly overestimates resistivity for high-potassium, low-sodium biomass ash.
Bickelhaupt is verified against a published worked example (US Patent 7078235 / EPRI CS-4145) and is well-established for coal fly ash across a wide alkali range.
What this answers: Same as the biomass version, using a correlation built specifically for coal ash instead.
The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.
Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.
No coal fuel database yet — enter ash composition manually below. Defaults shown are typical bituminous coal ash.
Per-oxide dielectric constants: high confidence for MgO (9.65, well-established) and TiO2 (86/170, rutile tensor, matches literature closely). Lower confidence for Na2O/K2O/SO3/P2O5 (pure-compound values are not well tabulated in standard references — treat as engineering estimates).
| Value |
|---|
Bickelhaupt equations from EPRI CS-4145 (Bickelhaupt, published via US Patent 7078235), cross-checked against the patent's own worked example (Table 19) before use here.
Quick reaction — was this calculator useful?
Was this calculator useful? Tell us what's missing or what you'd like to see next.