PlantAISim

Emission Control Train / Particulate Collection

Electrostatic Precipitator (ESP)

Reference-based what this means

Sized from first-principles corona and charging physics, not just the empirical Deutsch-Anderson constant — corona onset field, operating voltage, particle saturation charge, current density, and migration velocity are each solved in sequence, then combined into a Matts-Ohnfeldt-form efficiency (η=1−exp(−√(wA/Q)), more realistic than plain Deutsch-Anderson for real particle-size distributions). Operating voltage is solved, not assumed: it's pushed up toward the corona onset multiple that brings the back-corona field to 80% of its critical limit — the practical ceiling for how hard an ESP can be run before back corona degrades collection. The field itself is approximated as simple V/d (uniform parallel-plate); the true non-uniform field near electrode tips, shown above, needs full CFD.

? New here? How to use this calculator

What this answers: How large an electrostatic precipitator needs to be, and how it should be operated, to collect enough fly ash to meet an emission limit.

The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Flue Gas at ESP Inlet
m³/hr, actual conditions
°C
bar
Used only to convert actual gas volume to normal (Nm³) basis for the concentration figures below — a simplified temperature/pressure correction (wet-basis, no O2 or moisture correction applied; use the Emission module's own normalized flow for a fully corrected figure).
Fly Ash Loading & Emission Target
kg/hr
mg/Nm³
% — informational, cross-checked below
Fly Ash Electrical Properties?

From the Fly Ash Electrical Properties module — copy your own result in here.

typical 2-5, high unburned carbon 6-10
Ω·cm
µm
Discharge Electrode Design
mm — needle 0.5-2.0, wire 1.0-1.75
cm — 15-20 standard, 25-30 for high-resistivity ash
CFD comparison across 9 discharge-electrode geometries found electric field strength varies enormously by tip shape — some concentrate field well ("high force and ions", usable), others leave the field too diffuse to drive effective particle charging. Geometry choice matters as much as any single parameter below.
ESP Sizing Targets
how many separate electrical fields the gas passes through in series, gas-flow direction
m — length of ONE field along the gas-flow direction
m/s — 1.2-2.4 typical
m²
T-R Set & Solver Settings
% of critical back-corona field (1,000,000 V/m) — the target the solver pushes voltage toward
× minimum theoretical current, 10-20 typical

Corona & Operating Voltage (solved)?

Charging Physics

Migration Velocity & ESP Efficiency?

T-R Set Sizing

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback