PlantAISim

Combustion & Emissions / Regulatory Reporting

Emission

Reference-based what this means

NOx (fuel-bound nitrogen conversion), SOx (alkali sulfation vs. chlorination competition), and dust — reported as ppm (gases) and mg/Nm³ (dust), on a dry-gas basis at your local regulatory reference O2%.

? New here? How to use this calculator

What this answers: Expected NOx, SOx and dust leaving the furnace, in the units your local regulation actually reports (ppm, mg/Nm³) at the correct reference O2%.

The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Fuel A
Fuel B (optional blend)
Fuel A: 100%Fuel B: 0%
Combustion Conditions
%
blank = 1.2+0.002×M
°C
s — default: Grate ~3.0s, Suspension ~1.5s
Coal NOx Calibration (used only if Fuel category = Coal)

Default coefficients from Kim et al. 2019 (Appl. Sci. 9, 2914) — a coal-specific drop-tube-furnace regression, R²=0.81 on the original 20-sample dataset. Recalibrate here against your own measured NOx if available.

Fuel at Design Moisture

NOx (Fuel-Bound + Thermal)

Thermal NOx uses the Extended Zeldovich mechanism (kf1-3, kr1-2 rate constants — standard combustion-textbook values) with peak temperature approximated as the Adiabatic Flame Temperature, and a typical furnace gas residence time for the selected firing technology in place of detailed reactor geometry — a screening-level estimate. For maximum accuracy, especially at high AFT where Thermal NOx dominates, a dedicated CFD combustion/NOx simulation accounting for actual furnace geometry, mixing, and local temperature/species gradients is recommended.

SOx (Sulfation vs. Chlorination)

Sufficiency Ratio R = Alkali(mol) / [Cl(mol) + 2×S(mol)]. R≥1 → alkali in excess → sulfation proceeds, ~72.5% of S retained in ash as sulfate (Umeå University pilot-FBC data, natural/inherent capture, no added sorbent). R<1 → competition favors chlorination kinetically → retention scaled linearly by R (engineering interpolation — not itself literature-verified, only the R≥1 endpoint is).

Dust (Particulate)

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback