PlantAISim

Combustion & Emissions / Stoichiometric Engine

Basic Combustion

Validated what this means

Full stoichiometric combustion calculation — pick fuel(s) from the Fuel Data database (or blend two), set a design moisture independent of the native sample moisture, and get complete flue gas composition, air split, and standard dry flow at your reference O2%.

Reuses the same fuel database and blending logic as Fuel Data — Mixed Fuel Blend. Excess air ratio defaults to m = 1.2 + 0.002×Moisture% (your own validated design correlation) — editable per project.

? New here? How to use this calculator

What this answers: Given a fuel and how much air you supply, what comes out the other side — flue gas composition, air needed, and flame temperature.

The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Fuel A
Fuel B (optional blend)
Fuel A: 100%Fuel B: 0%
Design Moisture & Heating Value?
% — independent of blend's native moisture
Combustion & Site Conditions
kg/hr
°C
°C — from ambient or air preheater
°C — baseline for heat balance
m — or set pressure directly below
bar — leave blank to use altitude
% — varies by local regulation
kg/kg dry air — from Air Properties module
leave blank for m=1.2+0.002×Moisture%
% of total combustion air
% (auto = 100 − Primary)
% — default per US Patent 7078235 (0.1-0.65% typical)

Fuel at Design Moisture

Fixed Carbon is assumed to burn directly to CO2 (32,762 kJ/kg C — standard heat of combustion, ΔHf°(CO2)=-393.5 kJ/mol) since this carbon already exists in this form in the plant structure. The remaining LHV budget belongs to the volatile matter (Carbon-volatile → CO/CO2 per the kinetics of a specific combustion model, + Hydrogen → H2O) — prepared here for the future Fixed-bed and Suspension/Pulverized combustion modules.

Heat Release & Adiabatic Flame Temperature

Air & Combustion Gas Summary

Flue Gas Composition

SpeciesWet Vol%Dry Vol%Wet Wt%

Acid Species & Dew Points

H2SO4 (from SO3), H2SO3 (from remaining SO2), and HCl (from fuel chlorine, assumed ~100% conversion) — Verhoff-Banchero/Pierce/Kiang correlations. Keep metal surface temperatures above the highest of these to avoid acid condensation corrosion.

SOx at Reference O2% (Legal)

Primary / Secondary Air Split

Flow Rates & Density

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback