PlantAISim

Ash Chemistry / Slagging, Fouling & Melting Risk

Ash Melting Analysis — RDF & MSW

Reference-based what this means

Same classical indices and ternary phase estimate as the biomass/coal module, plus a Heavy Metal Worst-Case Screen for Zn/Pb/Ni/Cr chloride systems common in waste-derived fuels. For fuels without heavy metals, use Ash Melting Analysis — Biomass & Coal instead.

Screening tool from bulk XRF ash-oxide composition — not a substitute for lab-measured Ash Fusion Temperature or CCSEM mineralogy.

? New here? How to use this calculator

What this answers: Same slagging/fouling screening as the biomass/coal version, plus a check for waste-derived fuels where heavy-metal chlorides are a bigger concern.

The numbers already in the fields are a complete, working example — not a template you must match. Overwrite any of them with your own design's values; the results update as you type.

Unfamiliar term? Look for a ? next to a field label, or browse the full Glossary.

Fuel Source

Ash Oxide Composition (wt%)

For Alkali Index (optional)

Heavy Metals & Chlorine (RDF/MSW only)

Leave at 0 if not measured — the worst-case screen below is skipped automatically.

Layer 1 — Classical Slagging & Fouling Indices

IndexValueRisk

References: Bryers (1996), Miles et al. (1995/1996), Pronobis (2005), Wnorowska et al. (2020). Screening tool only — see caveat below.

Layer 2 — Ternary Phase Estimate

Screening tool, not lab measurement. All results are computed from bulk XRF ash-oxide composition, which does not capture real particle-level mineralogy. Treat as a first-pass risk screen. For design decisions, confirm with lab-measured Ash Fusion Temperature (AFT) or CCSEM.

Quick reaction — was this calculator useful?

Was this calculator useful? Tell us what's missing or what you'd like to see next.

Send Feedback